What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 21.06.2025 07:55

But it can get overloaded, and no longer works.
There are two important concepts here.
These devices are installed between the “hot” and “neutral” and protective ground.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
First Sentence:
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
(Dc diagram shown, AC is similar).
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
The other is “what does a “fuse” do?”
He then describes Rainy Season and Lightning.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Why do liberals refuse to define what a woman is and what does that mean for the future of feminism?
In schematic diagrams this is the symbol for a fuse:
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
He then describes the function of a fuse.
2024–10–10[John johnson John Johnson ]
[image of Common-mode choke]
Edit 2024–10.
The Biggest Pokémon Card Crashers And Climbers This Week - June 2 - IGN
There are three different concepts here that are getting confused.
What does a fuse do?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
The third is lightning and “how it gets conducted into a home.”
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
What was your first gay male experience?
[old diagram got deleted by accident]
But… the neutral is now “floating” because of the 1 ohm resistance.
a photo is worth a thousand words.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
This is where this question deviates from being a 'generic' question, and becomes more specific.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
What can we learn from the fatal shooting of UnitedHealth CEO Brian Thompson?
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
The bolt then partially travels down the line to your home.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
A father of 3 felt healthy. Then a routine screening found a rare, deadly illness. - CBS News
For this case there are devices called Metal oxide varistors (MOV).
One
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Is it ethical for same-sex couples to raise children?
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
What is the best at home LED/red light therapy tool?
It seems Mohan does not understand the difference between a comment and an Answer.
The MOV will conduct when the voltage exceeds 50% of line voltage.
What is lightning?
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
At least they know the answer if they wanted it.
but this device (an Inductor) … impedes the rapid changes in the current.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Here is a simplified AC power diagram.
the problem then depends on "how fast does the fuse operate?".
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
This is 'the assistant's answer'
Now when you have a certain ac resistance, then a current flows in a loop.
This is where the MOV conducts again, and dissipated the energy.
One is “what exactly is in a ‘surge protector’ ? ”
so, what happens?
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
A circuit breaker is similar, but is resettable.
eight
I post the exact comment here.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
what exactly is a ‘surge’ protector?
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
2024–10–16 [ OO OLAOYE OYEBODE ]
nine
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
A fuse is a non-resetable over current circuit protector.
Upvotes:
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
These are simplified answers to the original question, and does not change anything I wrote above.
This one hit behind the barn.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
An AC voltage/ current source, and an ac inductive load.
Barnstars:
This device then solves the entire problem.
but I think this circuit , shows a few more pieces.
It also is a device that limits the change in current flow.
At one ohm, the resistor has a maximum of 1 watt power.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
So, the voltage could go up to 500 volts, and the fuse will not open up.
He then asserts :
Because the load is inductive, the current lags the voltage.(by a bit).
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.